www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43017 120 revision: 02-may-07 cc/ec vishay sprague solid tantalum chip capacitors conformal coated features ? eight standard case codes, "pad compatible" with mil-prf-55365/4 (cwr06) ? high volumetric efficiency (up to 200 000 cv per cubic inch) ? low profile, conformal-coated construction ? 100 % low impedance power burn-in at + 85 c ? low esr in high frequency applications ? packaging in 50 unit 'blister-pack' trays or 8 mm or 12 mm tape and reel ? gold plated or solder dipped terminations ? type cc/ec capacitors are commercial equivalents of 49bc/ec applications ? medical ? aerospace ? military hybrids ordering information cc 685 h 035 k x s series capacitance case code rated voltage at 8 5 c capacitance tolerance packaging termination finish cc = standard range ec = extended range this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. see table j = 5 % k = 10 % m = 20 % b = bulk tray (50 pcs.) t = tape and reel x = requires internal spec. g = gold plated (rohs compliant) s = solder dipped dimensions in inches [millimeters] case code length l width w height h spacing typical s pad width b typical weight (grams) a 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.04 [1.02] 0.030 0.005 [0.76 0.13] 0.02 b 0.150 0.015 [3.81 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.09 [2.29] 0.030 0.005 [0.76 0.13] 0.03 c 0.200 0.015 [5.08 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.14 [3.55] 0.030 0.005 [0.76 0.13] 0.04 d 0.150 0.015 [3.81 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.09 [2.29] 0.030 0.005 [0.76 0.13] 0.07 e 0.200 0.015 [5.08 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.14 [3.56] 0.030 0.005 [0.76 0.13] 0.09 f 0.220 0.015 [5.59 0.38] 0.135 0.015 [3.43 0.38] 0.070 0.015 [1.78 0.38] 0.16 [4.06] 0.030 0.005 [0.76 0.13] 0.21 g 0.265 0.015 [6.73 0.38] 0.110 0.015 [2.79 0.38] 0.110 0.015 [2.79 0.38] 0.165 [4.19] 0.050 0.005 [1.27 0.13] 0.33 h 0.285 0.015 [7.25 0.38] 0.150 0.015 [3.81 0.38] 0.110 0.015 [2.79 0.38] 0.185 [4.70] 0.050 0.005 [1.27 0.13] 0.50 notes: 1. for polarity identification, when chip is in mounting positi on, bare metal clip and weld stub are positive. top surface of t he negative terminal is blue. 2. anode riser (weld stub) may extend case size length dimension by 0.015" [0.381] maximum. 3. dimensions given are for gold plated terminations. for solder dipped terminations, add 0.015" [0.381] to dimension tolerance s. 4. spacing dimension is average distance between chip mounting terminations and therefore maximum distance between mounting pad s on substrate. * pb containing terminations are not rohs compliant, exemptions may apply top view (see note 1) 0.005 [0.127] typ. w s b b l side view negative termination positive termination h 0.015 [0.381] max. w eld stub rohs * compliant a v aila b le p b -free example: cc685h035kbs
document number: 43017 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-may-07 121 cc/ec solid tantalum chip capacitors conformal coated vishay sprague ratings and case codes f pf code 4 v 6 v 10 v 15 v 20 v 25 v* 35 v* 50 v* 0.10 104 a a a a a a a a 0.15 154 a a a a a a a a 0.22 224 a a a a a a a b 0.33 334 a a a a a a b b 0.47 474 a a a a a a, b a, b c 0.68 684 a a a a b b c d 1.0 105 a a a a, b a, b a, c b, d e 1.5 155 a a a, b a, b a, c b, d c, e f 2.2 225 a a, b a, b a, c b, d c, e d, f f 3.3 335 a, b a, b a, c b, d c, e d, f e, f g 4.7 475 a, b a, c b, d c, e d, f e, f f, g h 6.8 685 a, c b, d c, e d, f e, f f, g h, f - 10 106 b, d c, e d, f e, f f, g f, g g - 15 156 c, e d, f e, f f, g f, g f, h h - 22 226 d, f e, f f, g f, g f, h g - - 33 336 e, f f, g f, g f, h g h - - 47 476 f, g f, g f, h g h - - - 68 686 f, g f, h g h - - - - 100 107 f, h g h - - - - - 120 127 g g - - - - - - 150 157 g h - - - - - - 220 227 h - - - - - - - note: *preliminary values, contact factory for availability. standard ratings - type cc cap (f) case code 25 c dcl a 85 c dcl a 125 c dcl a df (%) esr 4 wvdc at - 55 c to + 85 c, surge = 5 v 2.7 wvdc at + 125 c, surge = 3.4 v 2.2 a 0.5 5.0 7.0 6.0 8.0 4.7 b 0.5 5.0 7.0 6.0 5.5 6.8 c 0.5 5.0 7.0 6.0 3.5 10 d 0.5 5.0 7.0 8.0 2.0 15 e 0.6 6.0 8.0 8.0 1.5 33 f 1.4 14.0 18.0 8.0 1.0 68 g 2.8 28.0 35.0 10.0 0.8 100 h 4.0 40.0 48.0 10.0 0.5 6 wvdc at - 55 c to + 85 c, surge = 8 v 4 wvdc at + 125 c, surge = 5 v 1.5 a 0.5 5.0 7.0 6.0 8.0 3.3 b 0.5 5.0 7.0 6.0 5.5 4.7 c 0.5 5.0 7.0 6.0 3.5 6.8 d 0.5 5.0 7.0 6.0 2.0 10 e 0.6 6.0 8.0 8.0 1.5 22 f 1.4 14.0 18.0 8.0 1.0 47 g 2.9 29.0 36.0 10.0 0.8 68 h 4.0 40.0 48.0 10.0 0.7 10 wvdc at - 55 c to + 85 c, surge = 13 v 7 wvdc at + 125 c, surge = 9 v 1.0 a 0.5 5.0 7.0 6.0 9.0 2.2 b 0.5 5.0 7.0 6.0 5.5 3.3 c 0.5 5.0 7.0 6.0 3.5 4.7 d 0.5 5.0 7.0 6.0 2.0 6.8 e 0.7 7.0 9.0 6.0 2.0 15 f 1.5 15.0 19.0 8.0 1.0 33 g 3.0 30.0 36.0 10.0 0.8 47 h 4.7 47.0 59.0 10.0 0.7 15 wvdc at - 55 c to + 85 c, surge = 20 v 10 wvdc at + 125 c, surge = 12 v 0.68 a 0.5 5.0 7.0 6.0 10.0 1.5 b 0.5 5.0 7.0 6.0 6.0 2.2 c 0.5 5.0 7.0 6.0 4.0 3.3 d 0.5 5.0 7.0 6.0 2.5 4.7 e 0.8 8.0 10.0 6.0 2.5 10 f 1.5 15.0 19.0 6.0 1.5 22 g 3.3 33.0 42.0 8.0 1.0 33 h 5.0 50.0 60.0 8.0 0.8
cc/ec vishay sprague solid tantalum chip capacitors conformal coated www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43017 122 revision: 02-may-07 note: *preliminary values, contac t factory for availability 20 wvdc at - 55 c to + 85 c, surge = 26 v 13 wvdc at + 125 c, surge = 16 v 0.47 a 0.5 5.0 7.0 6.0 12.0 0.68 b 0.5 5.0 7.0 6.0 8.0 1.0 b 0.5 5.0 7.0 6.0 8.0 1.5 c 0.5 5.0 7.0 6.0 6.0 2.2 d 0.5 5.0 7.0 6.0 3.5 3.3 e 0.7 7.0 9.0 6.0 3.0 6.8 f 1.4 14.0 18.0 6.0 2.5 15 g 3.0 30.0 36.0 6.0 1.0 22 h 4.0 40.0 48.0 6.0 1.0 *25 wvdc at - 55 c to + 85 c, surge = 32 v 17 wvdc at + 125 c, surge = 22 v 0.33 a 0.5 5.0 7.0 6.0 15.0 0.68 b 0.5 5.0 7.0 6.0 10.0 1.0 c 0.5 5.0 7.0 6.0 6.5 1.5 d 0.5 5.0 7.0 6.0 5.0 2.2 e 0.6 6.0 8.0 6.0 3.5 4.7 f 1.2 12.0 15.0 6.0 2.5 6.8 g 1.7 17.0 22.0 6.0 1.2 10 g 2.5 25.0 32.0 6.0 1.4 15 h 3.8 38.0 48.0 6.0 1.0 *35 wvdc at - 55 c to + 85 c, surge = 46 v 23 wvdc at + 125 c, surge = 28 v 0.22 a 0.5 5.0 7.0 6.0 18.0 0.47 b 0.5 5.0 7.0 6.0 12.0 0.68 c 0.5 5.0 7.0 6.0 9.0 1.0 d 0.5 5.0 7.0 6.0 6.0 1.5 e 0.6 6.0 8.0 6.0 4.5 3.3 f 1.0 10.0 12.0 6.0 2.5 4.7 g 1.7 17.0 22.0 6.0 1.5 6.8 h 2.4 24.0 30.0 6.0 1.3 *50 wvdc at - 55 c to + 85 c, surge = 65 v 33 wvdc at + 125 c, surge = 40 v 0.10 a 0.5 5.0 7.0 6.0 20.0 0.15 a 0.5 5.0 7.0 6.0 20.0 0.22 b 0.5 5.0 7.0 6.0 15.0 0.33 b 0.5 5.0 7.0 6.0 12.0 0.47 c 0.5 5.0 7.0 6.0 8.0 0.68 d 0.5 5.0 7.0 6.0 7.0 1.0 e 0.5 5.0 7.0 6.0 6.0 1.5 f 0.8 8.0 10.0 6.0 4.0 2.2 f 1.1 11.0 14.0 6.0 2.5 3.3 g 1.7 17.0 22.0 6.0 2.0 4.7 h 2.4 24.0 30.0 6.0 2.0 standard ratings - type cc cap (f) case code 25 c dcl a 85 c dcl a 125 c dcl a df (%) esr standard ratings - type ec cap (f) case code 25 c dcl a 85 c dcl a 125 c dcl a df (%) esr 4 wvdc at - 55 c to + 85 c, surge = 5 v 2.7 wvdc at + 125 c, surge = 3.4 v 6.8 a 0.5 5.0 6.0 6.0 3.5 10 b 0.5 5.0 6.0 8.0 2.0 15 c 0.6 6.0 8.0 8.0 1.5 22 d 0.9 9.0 11.0 8.0 1.0 33 e 1.4 14.0 17.0 8.0 1.0 100 f 4.0 40.0 48.0 10.0 0.5 150 g 6.0 60.0 72.0 10.0 0.5 220 h 9.0 90.0 108.0 10.0 0.5 6 wvdc at - 55 c to + 85 c, surge = 8 v 4 wvdc at + 125 c, surge = 5 v 4.7 a 0.5 5.0 6.0 6.0 3.5 6.8 b 0.5 5.0 6.0 6.0 2.0 10 c 0.6 6.0 8.0 8.0 1.5 15 d 0.9 9.0 11.0 8.0 1.0 22 e 1.4 14.0 17.0 8.0 1.0 68 f 4.0 40.0 48.0 10.0 0.7 120 g 8.0 80.0 96.0 10.0 0.5 150 h 9.0 90.0 108.0 10.0 0.5
document number: 43017 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-may-07 123 cc/ec solid tantalum chip capacitors conformal coated vishay sprague note: *preliminary values, contac t factory for availability 10 wvdc at - 55 c to + 85 c, surge = 13 v 7 wvdc at + 125 c, surge = 9 v 3.3 a 0.5 5.0 6.0 6.0 3.5 4.7 b 0.5 5.0 6.0 6.0 2.0 6.8 c 0.7 7.0 9.0 6.0 2.0 10 d 1.0 10.0 12.0 8.0 1.5 15 e 1.5 15.0 18.0 8.0 1.0 47 f 4.7 47.0 57.0 10.0 0.7 68 g 7.0 70.0 84.0 10.0 0.7 100 h 10.0 100.0 120.0 10.0 0.5 15 wvdc at - 55 c to + 85 c, surge = 20 v 10 wvdc at + 125 c, surge = 12 v 2.2 a 0.5 5.0 6.0 6.0 4.0 3.3 b 0.5 5.0 6.0 6.0 2.5 4.7 c 0.8 8.0 10.0 6.0 2.5 6.8 d 1.0 10.0 12.0 6.0 2.0 10 e 1.5 15.0 18.0 6.0 1.5 33 f 5.0 50.0 60.0 8.0 0.8 47 g 8.0 80.0 96.0 8.0 0.8 68 h 11.0 110.0 132.0 8.0 0.8 20 wvdc at - 55 c to + 85c, surge = 26 v 13 wvdc at + 125 c, surge = 16 v 1.5 a 0.5 5.0 6.0 6.0 6.0 2.2 b 0.5 5.0 6.0 6.0 3.5 3.3 c 0.7 7.0 9.0 6.0 3.0 4.7 d 1.0 10.0 12.0 6.0 2.5 6.8 e 1.4 14.0 17.0 6.0 2.0 22 f 4.0 40.0 48.0 6.0 1.0 33 g 7.0 70.0 84.0 6.0 1.0 47 h 10.0 100.0 120.0 6.0 1.0 *25 wvdc at - 55 c to + 85 c, surge = 32 v 17 wvdc at + 125 c, surge = 22 v 1.0 a 0.5 5.0 6.0 6.0 8.0 1.5 b 0.5 5.0 6.0 6.0 5.0 2.2 c 0.6 6.0 8.0 6.0 3.5 3.3 d 0.9 9.0 11.0 6.0 3.5 4.7 e 1.2 12.0 15.0 6.0 2.5 10 f 2.5 25.0 30.0 6.0 2.0 15 f 3.8 38.0 46.0 6.0 1.0 22 g 6.0 60.0 72.0 6.0 1.0 33 h 9.0 90.0 108.0 6.0 1.0 *35 wvdc at - 55 c to + 85 c, surge = 46 v 23 wvdc at + 125 c, surge = 28 v 0.47 a 0.5 5.0 6.0 6.0 12.0 1.0 b 0.5 5.0 6.0 6.0 6.0 1.5 c 0.6 6.0 8.0 6.0 5.0 2.2 d 0.8 8.0 10.0 6.0 3.5 3.3 e 1.0 10.0 12.0 6.0 2.5 4.7 f 1.7 17.0 20.0 6.0 2.5 6.8 f 2.4 24.0 29.0 6.0 2.0 10 g 4.0 40.0 48.0 6.0 2.0 15 h 6.0 60.0 72.0 6.0 2.0 standard ratings - type ec cap (f) case code 25 c dcl a 85 c dcl a 125 c dcl a df (%) esr
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
